RSTX-999173

Product information RSTX-999173

Special tool for timing belts, NW basic adjustment

For 1.0, 1.2, 1.4, 1.5, 1.6 TFSI, such as VAG 611007"
Timing tool set for basic and fine adjustment of the camshaft and crankshaft positions on modern, timing belt-driven TSI and TFSI engines from VW, Audi, Seat, Skoda and Cupra.
This professional special tool replaces the use of the electronic, hardware-bound original adjustment tool (such as VAG 611007) and enables adjustment with an accuracy of 0.05° using an electronic angle gauge.

The original VAG measuring system (611007) is based on software that is installed on a PC or laptop.
With this precisely manufactured special tool, no digital connection is required.
All work steps can be carried out identically to the original repair manual must be carried out. This gives the mechanic additional operating safety and the engine repairs can be carried out specifically according to the manufacturer\'s specifications.

NOTE:
The digital inclinometer requires 2x AAA batteries. These are not included in the delivery and must be ordered separately (part no. 123388).

Suitable for the following VAG engine codes:
1.0L TSI, TFSI:
CHYA, CHYB, CHYC, CHYE, CHZA, CHZB, CHZC, CHZD, CHZE, CHZF, CHZG, CHZJ, CHZK, CHZL, CPGA, CWRA, DAFA, DBYA, DFNB, DKJA, DKLA, DKLB, DKLC, DKLD, DKRA, DKRB, DKRC, DKRD, DKRE, DKRF, DLAA, DLAB, DLAC, DUSA, DUSB, DXTA, DXUA

1.2L TSI, TFSI:
CBZB, CJZA, CJZB, CJZC, CJZD, CYVA, CYVB, CYVC, CYVD

1.4L TSI, TFSI:
CAVF, CHPA, CHPB, CHZJ, CMBA, CNLA, CNUB, CPTA, CPVA, CPVB, CPWA, CRJA, CTHF, CTJB, CUKB, CUKC, CVNA, CXSA, CXSB, CXUA, CZBA, CZCA, CZCB, CZCC, CZDA, CZDB, CZDD, CZEA, CZTA, DGEA, DGEB, DGXA, DJKA, DJKD, DJVA

1.5L TSI, TFSI:
DACA, DACB, DADA, DFYA, DHFA, DPBA, DPBC, DPBE, DPCA, DRBA, DUCA, DUCB, DXDB, DXDE

1.6L TSI, TFSI:
CWVA, CWVB

to be used such as:
VAG 611 007 Electronic measuring system for camshaft timing, such as adapter set VAG 611 007/18 and VAG 611 007/19
consisting of:
- Angle sensor, circlip and clamping ring, such as VAG 611 007/1, circlip VAG 611 007/2, VAG 611 007/3
- Adapter for camshaft housing such as VAG 611 007/4, VAG 611 007/8, VAG 611 007/15
- Adapter for angle sensors and camshafts such as VAG 611 007/5, VAG 611 007/6, VAG 611 007/7, VAG 611 007/9, VAG 611 007/10, VAG 611 007/16, VAG 611 007/17
- T10340, T10499A, T10500, T10504/1